The Security Girl's Blog

Home » Posts tagged 'CO Safety'

Tag Archives: CO Safety

Replacement of Restaurant Dry Chemical Systems: January 1, 2014

NFPA 96, Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations, was recently updated.

The newly released 2014 edition has a requirement that impacts old dry chemical systems. Effective January 1, 2014, all automatic fire extinguishing systems for the protection of commercial cooking equipment are required to meet ANSI/UL 300, Standard for Fire Testing of Fire  Extinguishing Systems for the Protection of Commercial Cooking Equipment (2005, revised 2010), or an equivalent standard. This means that existing pre-engineered dry chemical systems protecting this hazard will need to be removed and replaced.

Pre-engineered wet chemical fire suppression systems that are listed to UL 300 are the most common means for protecting commercial cooking equipment, because they are effective, reliable, and economical. They are also the only pre-engineered systems that meet the stringent listing criteria of this Underwriters Laboratories fire test standard. For these reasons, any restaurant looking to replace an existing dry chemical system will most likely request the installation of a UL 300 wet chemical system.

The reference for this deadline is NFPA 96, 2014 edition, paragraph NFPA issued the updated standard on August 1, 2013, with an effective date of August 21, 2013.

For more information call (937) 262-7937 or visit our web site today!

Kitchen Hood System

Do I need a Carbon Monoxide Detector?

With winter upon us it is important to remember the dangers of Carbon Monoxide. Per the Journal of the American Medical Association, 1,500 people die and 10,000 people become ill each year because of carbon monoxide poisoning.

For those of you who don’t know Carbon Monoxide is a colorless and odorless gas that is given off during the burning of fossil fuels. In other words, when we burn coal, charcoal, gasoline, natural gas, other fossil fuels, and even wood, we are introducing fossil fuels into the air. Poorly vented fireplaces, stoves, chimneys and vents can all leak CO into the air, as can vehicles left running in an attached garage.

Having a Carbon Monoxide detector in your home is the only way to assure that you and your family are properly protected 24/7 from the colorless and odorless gas that is given off during the burning of fossil fuels.  The detector will be able to alert you and your family that the harmful Carbon Monoxide is present in your home.

If you have had your Carbon Monoxide detector for a while and want to be sure that it is still working properly you can use the test button on your CO Detector which will verify that the circuitry is operating correctly, not the accuracy of the sensor.  You will also want to be sure to follow the manufacturer guidelines as to when to replace your Carbon Monoxide detector.

If  your Carbon Monoxide detector sounds you should do the following:

  1. Immediately move outside to fresh air.
  2. Call your emergency services, fire department, or 911.
  3. After calling 911, do a head count to check that all persons are accounted for. DO NOT reenter the premises until the emergency services responders have given you permission. You could lose consciousness and die if you go in the home.
  4. If the source of the CO is determined to be a malfunctioning appliance, DO NOT operate that appliance until it has been properly serviced by trained personnel.

If your not sure where the Carbon Monoxide detectors should be placed in your home check with your local building codes or fire departments.  Starting January 1, 2013 the state of Ohio will have a new residential building code regarding the placement of Carbon Monoxide.

You can also add Carbon Monoxide detectors to your alarm system so that in the event that the detector goes off the authorities will be notified immediately.

For more information on Carbon Monoxide detectors contact American Fire & Security today at (937) 262-7937 or toll free at (877) 237-8918.

Stay Safe!

The Security Girl

New Residential Building Codes for Ohio Includes Carbon-Monoxide Detectors

I am excited for some of the new home construction building codes for Ohio!  These new building codes will become effective January 1, 2013.

Per an article on some of the new home building code requirements for Ohio will be:

1) Carbon-monoxide detectors must be installed outside each bedroom in a home that uses gas or propane or includes an attached garage.

2) Homes must meet an air-tightness standard that includes a blower-door test.

3) At least 75 percent of light bulbs in new must be high-efficiency.

I know that these new building codes are going to cost the homeowner more money upfront however the energy requirements should allow the homeowner to recoup some of the money over time.  More importantly the safety factors that have been built into the new building code are invaluable to your families safety.

To find out more about adding Carbon-monoxide detectors to your alarm system give us a call today at (937) 262-7937.

Stay Safe!

The Security Girl

2gig Wireless CO2 Detector

Alarm System Carbon Monoxide Detector

%d bloggers like this: